Page 1 of 1

Traqmate Basic Firmware - 12/14

Posted: Tue Aug 09, 2005 1:51 pm
by Track Systems
THIS IS FOR TRAQMATE BASIC ONLY.

DO NOT DOWNLOAD THIS FILE TO A TRAQMATE THAT HAS A DISPLAY UNIT!
IT WILL STOP TALKING TO THE DISPLAY


How To Update Your Basic
Upload all your sessions because they will be lost

Download ssu.tqc from traqmate.com forum
Plug the Sensor Unit (SU) into the computer
Run Traqview
Select Tools / Firmware Update
NEW - Press "Connect to DU", "Automatic", or press the DU icon at the top of Traqview
NEW - User can reprogram a basic through a DU
Use Browse to Pick the ssu.tqc file
Click Start and wait until all lights on SU stop flashing

Very Important
After this is complete, go back to the user info and data IO tabs click SAVE



Traqmate Basic 3.70
Click this link to download the firmware file for the standalone Sensor Unit. You may need to right-click and Save As.
http://www.traqmate.com/downloads/firmw ... sic370.tqc

In Traqview, "Connect to SU" will no longer work.
User must press "Connect to DU", "Automatic", or press the DU icon at the top of Traqview

User can reprogram a basic through a DU

Faster basic upload times (slightly)

2. changed default camera. It is now set to "Camera, Automatic". This is a redefinition of what those used to mean but they were not really used before so that is ok. This will be easiest to tell customers because we do not have Mobius and Replay Prime on the menu.

In this mode, it will detect the TraqData USB and assume there is a Mobius connected so timing will be off for a Replay but it will work reliably.

Image



Traqmate Basic 3.50

Click this link to download the firmware file for the standalone Sensor Unit. You may need to right-click and Save As.
http://www.traqmate.com/downloads/firmw ... sic350.tqc

Improvements

Added support for TraqData USB

**Note** Defaulted for 20hz. For comparison to TraqDash files and optimal camera timing we recommend 40hz. 40hz cuts recording time from 11 to around 6.

Traqmate Basic 3.40

Click this link to download the firmware file for the standalone Sensor Unit. You may need to right-click and Save As.
http://www.traqmate.com/downloads/firmw ... ic/ssu.tqc

Improvements

Added support for Replay camera
Added GPS simulator for use with TraqDash

Traqmate Basic 3.33

Click this link to download the firmware file for the standalone Sensor Unit. You may need to right-click and Save As.
http://www.traqmate.com/downloads/tmrelease333/ssu.tqc

Improvements

Fixed bug causing SU to get hung up when power drops quickly such as starting a car

Traqmate Basic 3.30

Click this link to download the firmware file for the standalone Sensor Unit. You may need to right-click and Save As.
http://www.traqmate.com/downloads/tmrelease330/ssu.tqc

Features
Support for TraqData Pro and TraqSync Pro with GoPro HERO1 and HERO2 HD cameras
Small bug fixes

Traqmate Basic 3.00

Click this link to download the firmware file for the standalone Sensor Unit. You may need to right-click and Save As.
http://www.traqmate.com/downloads/tmrelease300/ssu.tqc

Features
Support for TraqData HD and Sony HD Camcorders
Faster GPS Startup
Data Recovery if Power Lost

Traqmate Basic 2.15

Click on the link below to download. You may need to right-click Save As.
http://www.traqmate.com/downloads/tmrelease215/ssu.tqc

This fixes issues with the AutoStart / AutoStop features added in V2.10.

Bug Fixes
Traqmate Basic did not working correctly with the TraqSync cable when using AutoStart.
Unit could stop recording even when AutoStop was disabled.

These problems do not exist in Traqmate Complete (Traqmate with Display Unit) so there is no planned release of a Traqmate Complete 2.15 at this time.

Traqmate Basic 2.10

Click on the link below to download. You may need to right-click Save As.
http://www.traqmate.com/downloads/tmrelease210/ssu.tqc

Features

Better Dropout Handling
Unit fills in some dropouts automatically for better performance.
Less glitches in the data.

AutoStart
Start recording at given speed
Set it and forget it. Never miss another session.
Stop recording after given time not moving
Works with ChaseCam 4-wire interface for automatic video recording.

Button Control
Disable Record Button option, Disable Off button option
For vehicle performance auditing or other applications. Special hidden option intended for driving schools, rent and drive groups, and sanctioning bodies.

Support for ChaseCam 4-wire interface
PDR auto turn-on
More robust - replaces delicate TraqCam cable
PDR auto turn-off
Turns unit on and off to eliminate confusion and improper synching
PDR start/stop record
No tool hookup - thumb-screw DB-15 connection, Posi-lock tach connection, and built-in RJ-45 cable for ChaseCam digital interface.

40Hz Improvements
Improved 40Hz accuracy in conjunction with Traqview updates
40Hz mode now more usable and accurate.

[color=indigo]Traqmate Basic 1.30.

Click on the link below to download. You may need to right-click Save As.
http://www.traqmate.com/downloads/tmrelease130/ssu.tqc

NOTE: ANALOG SCALING CHANGED. RECALIBRATE TRAQDATA SENSORS AFTER INSTALLING THIS FIRMWARE.

Features:
ChaseCam synchronous control - turns camera record on when GPS lock obtained
Digital Outputs - shift light and analog input alarms
Improved Analog Input Accuracy
Various other small improvments

Traqmate Basic 1.25.
This version fixes bugs with recognition of TraqData and TraqTach and data synchronization.
http://www.traqmate.com/downloads/tmrelease125/ssu.tqc

Traqmate Basic 1.22.
This version supports the TraqData and TraqTach.
http://www.traqmate.com/downloads/tmrelease122/ssu.tqc

No feature changes.
More accurate alignment of GPS and accelerometers
Better dropout protection when used with Traqview 1.22

Traqmate Basic 1.08
Improved data collection and GPS reception.
http://www.traqmate.com/downloads/tmrelease108/ssu.tqc

Traqmate Basic 1.01
http://www.traqmate.com/downloads/tmrelease101/ssu.tqc